Replacing A Bicycle Pedal Is Not As Hard As You Think
You might lose control of your pedal for a variety of reasons. Or perhaps you've decided to go to clipless pedals. Whatever it may be, all you would have to do is remove your old road bike pedals and replacing a bicycle pedal with a new one. If you're still having trouble with it, continue to read, and you'll find a solution.
This task is not as straightforward as it looks. Pedals aren't threaded in the way you'd think — or at least one isn't. The classic "lefty-loosely, right-handed" rhyme will not work here, and you risk destroying your new pedals if you do not even know what you've been doing.
We show you how to switch pedals, including what tools you'll need, remove pedals, and replace them so you can immediately get back on your bike. Gather your stuff, and let's get started!
Prepare Tools For Replacing A Bicycle Pedal
The first stage is to gather some tools for your operation, which you may do in one of two ways.
Option 1: Certain wrenches are made exclusively for removing pedals, and you can use these if you need a rapid change.
Option 2: This option is for mechanics who have a workplace. Gather the following resources:
- 8mm or 6mm Allen or Hex Key 15mm wrench or spanner: Highly specialized tool for removing pedals 8mm or 6mm Allen or Hex Key
Rather than a 15mm open-ended spanner, a bicycle pedal wrench has a narrower width to fit into the sometimes cramped spaces available. Another factor to consider is force, commonly provided by bicycle-specific pedal wrenches and hex keys when loosening tight pedals.
A 'wrench flat,' which is a flat region on the top and bottom of the pedal spindle that may be used to grip a wrench, is found on some pedals. Instead of smooth surfaces, some pedals have a Hex fitting in the pedal spindle that requires an 8mm or 6mm Allen Key to remove and install.
If you already have one, use a full-size Allen key rather than a multi-tool for the Allen key. With a tiny multi-tool, I once attempted to install a set of pedals. I sliced my hand when tightening the pedals. I removed the pedals without using a tool at the end of my hour-long ride since they had loosened so much. As a result, having the right tools is crucial.
You'll also have to apply a little lubricant to your new pedals so that they screw in easily and don't freeze up.
Get Your Bike Ready To Replace Your Bike Pedal
Invert your bike and ride it backward.
You may place the bike on a stand if you have one. Otherwise, prop it up against a fence or a wall. It's easier to replace the pedals when the bike is upright, so there's no need to turn it over.
Shift to the highest gear or the biggest chainring if you have multiple gears upfront. If you slide while working on your pedals, this might assist protect your knuckles.
It's time to remove your pedal once you've flipped your bike.
Take Off The Bike Pedal
The right-hand pedal, also known as the drive-side pedal (the side with the chain), will loosen regularly. The non-drive-side pedal, or the left-hand pedal, will loosen clockwise, the reverse of typical.
To make matters even more complex, if you're using an Allen key, it may appear that you're approaching the pedal from the wrong side. Make sure you're considering it from the perspective of being on the right side of the bike for the right pedal and the left side for the left pedal.
Can't seem to keep up? This is how I recall it: You remove the pedal by turning it toward the back of the bike and then add the pedals by turning it toward the front of the bike. It's a gimmick, but it's effective for me.
Prepare to track down any washers that may have dropped off after replacing the pedals. There are no concerns if there aren't any washers; some crank arms require them for safety, while others don't.
Take A New Pedal And Install It
It's critical to have the correct left and right side pedals since the threads are different. An "L" and an "R" will be imprinted on most pedals. Hold the side of the pedal by the side if you can't find it. The threads should be curling up in different directions. The threads on the right-side pedal rise to the right, whereas the left-hand thread on the left-side pedal increases to the left.
If washers are required, slip them onto the new spindles. Also, a small amount of lubricant should be applied to the pedal threads. The lubricant will make the pedal go on more smoothly and prevent it from freezing up again.
Keep in mind the pedals are installed at a 90-degree angle to avoid cross-threading. Understand that the pedal on the driving side tightens clockwise toward the front wheel while the pedal body on the non-drive side tightens counter-clockwise (toward the front wheel).
After you feel resistance, tighten them to the manufacturer's stated torque, which is normally approximately one-eighth of a turn.
Some Multi-tools You Can Use To Repair Your Bike
The best bike multi-tools are available in various forms, with some stuffing a workshop full of equipment into the swiss army knife wrap design. Still, many are ultralight and simple, with only the bare necessities — or perhaps the wrong equipment completely. It's critical to find the right balance of size and utility, and remembering to bring your multi-tool and your best bike pump on your rides may help you maintain your individuality. You can easily replace your bike pedal with these multi-tools, even fixing your bicycle with them. Check it out for some of the top multi-tools you can get on any e-commerce site such as eBay or Amazon.
- Topeak Mini PT30
- Blackburn Tradesman
- Fix-it Sticks
- Topeak Ratchet Rocket Lite DX+
- Birzman Feexman E-Version 5
Video: How To Remove Bicycle Pedals - The Easy Way
There seem to be many reasons to replace your pedals, including repairing faulty ones or changing to better ones. Alternatively, you might want to go from flat pedals to clipless or from clipless to flats. Just what the case may be, you already know how to clean and replace bike pedals without damaging them.